Page 2
Piazza Cavour 7, 20121 Milano - Italia Via Guglielmo Lippi Francesconi 1256/J, 55100 Lucca - Italia P.IVA: 09887990969 MOVE-X CUSTOMER ASSISTANCE SERVICE Visit the website at www.movesolutions.it for contact information relating to the addresses and telephone numbers of the offices.
Page 3
CLOCK: 32MHz TCXO, 32.768KHz XTAL TX POWER: low power path (up to +14 dBm) high power path (up to +22 dBm). RF OUTPUT: Two assembly variants: • 50 Ohm u.FL connector • 50 Ohm pin Pag | 5 MAMWLExx - Move-X...
Page 10
I2S2_ SPI1_ CM4_ EVENTOUT RTC_ OUT1, SPI1_ CM4_ PC13 PC13 RTC_ EVENTOUT CM4_ EVENTOUT Internally connected. Not available as output Pin. Internally connected. Not available as output Pin. Pag | 18 Pag | 19 MAMWLExx - Move-X MAMWLExx - Move-X...
Page 11
The effettive power consumption depends on: temperature; supply voltage; clock settings. Independent watchdog, Window watchdog Given consuptions are for VDD = 3V; T = +25°C. Hardware Encryption/Decryption accelerator Pag | 20 Pag | 21 MAMWLExx - Move-X MAMWLExx - Move-X...
Page 12
MAMWLExx comes with two different option: Sensitivity (915Mhz, BW=500Khz SF=12) -127,9 50 Ohm u.FL connector 50 Ohm RF pin Sensitivity (915Mhz, BW=500Khz SF=7) -115,1 VDD = 3,3 V Pag | 22 Pag | 23 MAMWLExx - Move-X MAMWLExx - Move-X...
Page 13
If you would like to program using SPI or USART see AN2606 from ST first because there are some details that you must pay attention of. For example if you would like to Pag | 24 Pag | 25 MAMWLExx - Move-X MAMWLExx - Move-X...
Need help?
Do you have a question about the MAMWLE Series and is the answer not in the manual?
Questions and answers