Component Test Procedure; Primary Latch Switch, (Door Switch And Power Relay B) Interlocks - Panasonic NN-G335MF Service Manual

3. Remove the turntable motor by removing 1 screw.
NOTE:
After reinstalling the new turntable motor and reconnecting the 2
lead wires, reinstall the motor cover by rotating it around 180°,
tucking the 2 tabs under the base into the 2 provided slots, then
screw the single tab to the base using a screw.

8. COMPONENT TEST PROCEDURE

1. High voltage is present at the high voltage
terminal of the high voltage transformer during any
cook cycle.
2. It is neither necessary nor advisable to attempt
measurement of the high voltage.
3. Before touching any oven components, or
wiring, always unplug the oven from its power
source and discharge the high voltage capacitor.
8.1. Primary Latch Switch, (Door Switch and Power Relay B)
Interlocks.
1. Unplug the lead connectors to Power Relay B and verify
continuity of the power relay B 1-2 terminals.
CAUTION
20