Fault Messages In Sid - Saab 9-3 Convertible M2003 Owner's Manual

93uC03.book Page 54 Thursday, May 30, 2002 11:36 AM
54 Soft top

Fault messages in SID

The following CHECK messages are
included in the soft top system and can be
displayed on the SID together with a beep.
SID displays Cause
CHECK SOFT • The soft top storage bag is hooked up.
TOP STORAGE • An item in the trunk under the soft top is
obstructing the soft top.
CLOSE TRUNK • The raising or lowering of the soft top is
obstructed because the trunk lid is not closed.
LID
CHECK SOFT • The soft top is not latched to the top beam of the
TOP LATCHES windshield.
• Somebody is trying to lower the soft top while it
is still locked to the windshield beam.
FINISH SOFT • Raising or lowering was stopped before the
TOP MOTION cycle completed.
CHECK SOFT • The soft top cover is not being locked.
• The soft top cover doesn't open.
TOP COVER
SOFT TOP FAIL- • Serious fault in soft top mechanism.
URE
CHECK SOFT • Something is in the way and is obstructing the
TOP operation of the soft top by the electro-hydrau-
lics.
• The soft top cover has not locked at the front on
both sides.
• The 5th bow (rear window) has not locked to the
soft top cover on both sides.
Action
• Unhook and lower the soft top storage bag, see page 129.
• Make sure that no item in the trunk is lying against the soft top
storage.
• Close the trunk lid so it is latched securely.
• Lock the soft top with the locking handle, see page 51.
• Release the soft top with the locking handle, see page 49.
• Finish the soft top motion completely.
• Make sure that the valve for manual raising of the soft top is
closed, see page 52.
• Try to slide the ROOF button backwards once more.
• Try to slide the ROOF button once more.
• BE VERY CAREFUL AND MAKE SURE THAT NOTHING IS
OBSTRUCTING THE OPERATION OF THE SOFT TOP.
Remove anything that can obstruct the operation of the soft top.
• Operate the soft top manually, see page 52.
• Try to slide the ROOF button once more.
• BE VERY CAREFUL AND MAKE SURE THAT NOTHING IS
OBSTRUCTING THE OPERATION OF THE SOFT TOP.
Remove anything that can obstruct the operation of the soft top.