DEVICE SPECIFICATIONS NI PXIe-2526 1-wire 158 × 1 Multiplexer This document lists specifications for the NI PXIe-2526 (NI 2526) multiplexer relay module. ni.com/manuals All specifications are subject to change without notice. Visit for the most current specifications................Topology 1-wire 158 × 1 Multiplexer, 2-wire 79 ×...
>1 GΩ, typical at 25 °C Maximum current ..............Switching 2 A (per channel) ..............Carry 2 A (per channel) ................Minimum switch load 20 mV/1 mA The NI 2526 is not recommended for 2-wire resistance measurements. Note 2 | ni.com | NI PXIe-2526 Specifications...
IEC 60068-2-1 and IEC 60068-2-2. Meets MIL-PRF-28800F Class 3 low temperature limit and MIL-PRF-28800F Class 2 high temperature limit.) ................Relative humidity range 10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.) 4 | ni.com | NI PXIe-2526 Specifications...
Note equipment that does not intentionally generate radio frequency energy for the treatment of material or inspection/analysis purposes. For EMC declarations, certifications, and additional information, refer to the Note Online Product Certification section. 8 | ni.com | NI PXIe-2526 Specifications...
Page 11
National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt ni.com/patents file on your media, or the National Instruments Patent Notice at .