Power Sound Function; Connecting Headphones; Connecting To An External Source - Samsung MM-N4 Instruction Manual

Micro component system with remote control
Hide thumbs Also See for MM-N4:
Table of Contents

Advertisement

Power sound function

This machine is equipped with the function of POWER SOUND, which
amplifies bass treble output to twice as much for powerful real
GB
surround-sound.
1
Press the Power Sound button on the front panel.
Result:
P--SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
2
To cancel this function, press Power Sound again.
Mute
Phones
Pty

Connecting Headphones

You can connect a set of headphones to your micro component
system so that you can listen to music or radio programs without
disturbing other people in the room. The headphones must have a
3.5 mm connector or appropriate adapter.
Connect the headphones to the
(bottom left corner).
Result: The loudspeakers are no longer used for sound output.
Prolonged use of headphones at a high volume may
damage your hearing.
16
REC/Pause
Volume
Repeat(A<->B)
RDS
CD Synchro
Display
Power Sound
Power Sound
Phones connector on the front panel
Band
TUNER
TAPE
CD
AUX
On/Standby
REC/Pause
Volume
Repeat(A<->B)
Mute
Phones
RDS
CD Synchro
Pty
Display
Power Sound

Connecting to an External Source

The auxiliary input can be used to take advantage of the sound
quality of your micro audio system when listening to other
sources.
Example:
A television
A video disc player
A DAT or DCC cassette player
A Hi-Fi stereo video cassette recorder
To connect to an external source, the external source must
have an audio output terminal. In addition, you need an RCA
connection cable.
1
Before
connecting to an
mode and disconnect it and the external source from the outlet.
2
Connect the audio cable to the rear of the system.
Connect the...
Red jack
White jack
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the wall outlet and press On/Standby
to switch it on.
4
Press AUX.
Result:AUX is displayed.
5
Switch the external source on.
6
Adjust the volume and balance as required:
Volume
Equalizer
S. BASS
Example:
You can watch a film and take advantage of stereo
sound as if you were at the cinema (provided that the
original sound track is in stereo).
Band
TUNER
TAPE
On/Standby
3
Mute
Phones
RDS
Pty
Display
external source, set the system to standby
To the connector marked...
R (right)
L (left)
CD
AUX
AUX
4
REC/Pause
Volume
Repeat(A<->B)
CD Synchro

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents