Advertisement
STEP 7
Put back the gasket removed in STEP 4.
STEP 9
Using a #2 Philips screwdriver, install the four
screws to hold the base onto the unit.
AirMedic Pro 5/6 Plus/HD/Ultra
SuperHEPA & Carbon Filter Replacement
STEP 1
Follow steps 1-4 from
Pro 5/6 HEPA & Carbon filter
placement] to access the filters.
STEP 2A
[AirMedic
Remove the carbon filter along
Re-
with the SuperHEPA filter.
(Follow STEP 2B if you have
the Ultra 5" filter)
STEP 8
Place the base back, making sure the arrow
on the sticker lines up with the unit's rear
seam.
STEP 10
Flip the unit back in its upright position. Plug
it in and run it on high for a few minutes then
set it to your desired speed.
OLD
FILTERS
STEP 2B
Using the two straps on the sides
of the 5" Ultra Carbon filter pull/
lift up both Carbon and Super-
HEPA filter together.
7
Advertisement
