Advertisement
Nine Stars infrared motion sensor trash cans are designed and created to make dealing with trash cleaner and easier. Our products provide an effortless way to dispose of trash by providing a touch-free environment. Simply put an object or hand above the strategically placed infrared motion sensor (located near the lip of the lid) and the lid will automatically open. Once the object or the hand is no longer within the sensor's range the lid will automatically close within seconds. We at Nine Stars use the highest quality materials and the latest technology in our products to insure reliable function and durability. Thank you for your business and we sincerely hope that you enjoy your unit.
Remove all components of trash can from the box.
**Requires a Phillips Screw driver**
Locate the battery compartment underneath the trash can lid. Remove the small screw and tab. Use your fingers to pull up on both tabs located on the battery cover. Insert two (2) "AA" batteries in accordance with the positive (+) and negative (-) poles. Replace the battery cover back to the compartment and place the tab back on along with the small screw. Make sure to lock-in the tab securely.
Insert the trash bag using the liner ring (see diagram). Fold the trash bag over the edges of the liner ring. Place the trash bag and the liner ring in the trash container. Tuck the bag completely into the base of the container so that edges of the bag do not show once the lid is placed on top of the base.
Insert bag through the liner ring hoop first, then fold bag edges over the ring.
**DO NOT put liner ring inside the bag**
Align the lid with the base of the trash can and gently place the lid on top.
The "Power/Open/Close" button is located on the front of the automatic lid. Press the button to turn the power/sensor ON. Press and hold the button to turn the power/sensor OFF.
Place your hand or an object within inches of the motion sensor (located on the lid). The lid will open instantly. Once your hand or object is out of range of the sensor the lid will close within seconds.
Keeping Lid Open Longer - Press the "OPEN/CLOSE" button to open the lid and keep the lid in the open position for longer time period. Press the button again to close the lid and reset it back to sensor mode.
Water Resistant - You can clean the lid by placing it in upright position under a running faucet for a short period of time. NEVER submerge or soak the lid into water.
LED light indicators:
Errors | Solutions |
Lid does not open |
|
| |
| |
Lid does not close |
|
| |
| |
Lid opens slowly / LED turned Red |
|
Note: If the above solutions do not correct the problem please contact Nine Stars Customer Service.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the DZT-7-2S that isn't answered in the manual? Leave your question here.