Major Control Components - Wolf MWD24 Technical Service And Parts Manual

Thermal Cut-out
HV Capacitor
DISCONNECT ELECTRICAL SUPPLY BEFORE ATTEMPTING THIS PROCEDURE.
DANGEROUS HIGH VOLTAGE CAN BE PRESENT - CAREFULLY READ AND FOLLOW ALL WARNINGS AT THE
BEGINNING OF THIS SECTION. (PAGE 4-2)

Major Control Components:

1) Drawer Microwave must be removed from its installation. See Drawer Microwave Disassembly (page 4-6).
2) Only attempt this procedure after unit has been made safe by unplugging cord from supply receptacle and
discharging High Voltage Capacitor (See WARNINGS).
NOTE: Be careful to maintain proper wire location. Check for clear wire marking before removing any wires and label
any wires that can not be easily identifi ed.
Drawer Microwave
Magnetron
HV Transformer
Figure 4-17 Drawer Microwave Major Control Components
Fan Motor
4-13
Access & Removal
Power
Supply
Monitor Fuse