Table of Contents
Advertisement
Variable Search System
Press the SEARCH/EXIT button to display or exit the
search screen.
When a program is recorded, the starting point is given
an Index mark for easy location. However, the VHS
Index Search System(VISS) cannot recognize index
marks made by old VCRs. If the VCR has trouble
finding a mark, it is probably because the cassette was
recorded on a VCR without VISS.
If you want to index two programs in a row, set your
VCR to stop. Then start recording each program.
Pause has no effect on index marks.
1. Scan and play
Use scan and play when you don't know exactly where a program is located on a cassette tape.
1. Press ¨ for forward scan or à for reverse scan.
2. The display will show "Scan and Play".
3. When an index mark is found, the VCR plays for about five seconds.
4. Press PLAY to view that program.
If you don't press PLAY, the VCR automatically searches for the next index, or until the end of tape is reached.
2. Go to 0:00:00 stop
Use this feature when you want to search for the 0:00:00 counter position on a cassette. Press CLEAR at the
point on the tape where you want to set the counter to 0:00:00. Later, while a cassette is playing or stopped, press
button. The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then
automatically stop at that position.
3. End search
Use this feature when you want to search for a blank position to record a program on a cassette. While a cassette is playing
or stopped, press
button. The VCR will rewind or fast forward, searching to a blank position, and then automatically
stop at that position.
If the VCR reach the end of tape while end search, it will eject the tape.
14
VCR Operation
Scan and play:
Ã
¨
press [
] or [
]
Go to [0:00:00]:
Press [
¹
]
End search:
Press [ ]
0:00:00 SP
Advertisement
Table of Contents
