Table of Contents
Advertisement
Basic Features
To use the Position function after selecting Wide Zoom, Zoom or Screen Fit, follow these steps:
1. Select the Position.
2. On the
Position
screen, select Position, and then move the picture to position you want using your remote.
3. When done, select
4. To reset the picture position, select Reset.
Picture Sizes available by Input Source:
– ATV, EXT, AV:
Auto
Wide, 16:9,
– DTV (576i/p, 720p):
Auto
– DTV (1080i, 1080p):
Auto
– Component (480i/p, 576i/p, 720p): 16:9,
– Component (1080i, 1080p): 16:9,
– HDMI (480i/p, 576i/p): 16:9,
– HDMI (720p, 1080i, 1080p): 16:9,
✎
Depending on the input source, the picture size options may vary.
✎
The available items may differ depending on the selected mode.
✎
HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
✎
You can adjust and store settings for each external device you have connected to an input on the product.
4:3 Screen Size (16:9
•
determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European
country requires different picture size.
✎
Not available in HDMI, Component, and HDMI/DVI mode.
Position
again, and then select Close.
Wide
Zoom, Zoom,
Wide, 16:9,
Wide
Zoom, Zoom,
Wide, 16:9,
Wide
Zoom, Zoom, 4:3,
Wide
Zoom, Zoom,
Wide
Zoom, Zoom, 4:3,
Wide
Zoom, Zoom,
Wide
Zoom, Zoom, 4:3,
/
Wide Zoom
/
Zoom
/ 4:3): Available only when picture size is set to Auto Wide. You can
4:3
4:3
Screen Fit
4:3
Screen Fit
4:3
Screen Fit
English - 30
Advertisement
Table of Contents
