Z-300M/30M
5/12/03 10:29
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
•
Do not damage the power cord. Damage to the power
cord may cause a fire or shock hazard.
•
When unplugging the power cord, please hold by the
plug and remove it carefully in standby mode.
•
When you finish operating the unit, always turn off the
power. Leaving a disc loaded for a long time with power
turned on may damage the disc.
•
When you insert the disc, please do not insert over
another disc.
•
This product should not be used in business applications.
WHEN MOISTURE CONDENSATION GETS
IN THE UNIT
•
When the unit is moved from a cold area to a warm area
suddenly, moisture may condense on the mechanical parts
which restricts the laser signal from normal operation.
•
If this occurs, leave the unit with the power turned on for
1~2 hours. (without a disc)
Page 3
CONTENTS
3