Do you have a question about the A2008 and is the answer not in the manual?
Questions and answers
Robert A. Redstone
March 10, 2025
how to set time
1 comments:
Mr. Anderson
March 10, 2025
To set the time on the Amazfit A2008, follow these steps:
1. Download the Zepp App by scanning the QR code in the instruction manual or from the Google Play Store or Apple App Store. 2. Open the app, register an account, and log in. 3. Follow the steps in the app to pair your watch correctly. 4. Once pairing is complete, the watch will automatically display the correct time.
Note: Do not pair the watch directly using your mobile phone’s Bluetooth. Use the app for proper pairing.
01 Package Contents Smartwatch with Charging base × 1 Instruction Manual × 1 band × 1 02 About the Watch Heart rate sensor Power button Charging plates Note: Press and hold the power button to power on the watch. If the watch cannot be turned on, please charge it first.
03 Pairing the Watch Scan the QR code on the Instruction Manual with your mobile phone to download the app to your mobile phone. You can also download the latest version of App from the Google Play Store or Apple App store. Open the APP, register an account and log in.
05 Disassembly and Assembly of the Watch Strap Please refer to the illustrations to disassemble or assemble the watch strap. Note: Once the strap is assembled, pull the strap properly to ensure it is installed successfully. 06 Wearing the Watch Wear the watch strap not too tightly or too loosely, and leave enough space for the skin to breathe.
07 Basic Parameters Product model: A2008 Input: 5V d.c. 500mA MAX Bluetooth version: BLE V5.0 BLE output power: <5 dBm Operating temperature: 0°C to 45°C View product certification information on the watch's Settings > System > Supervision page. Water resistance rating: 5 ATM Bluetooth frequency: 2400–2483.5 MHz...
Page 6
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. IC: 21806-A2008 CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux...
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
10 Certifications and Safety Approvals Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device type A2008 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://support.amazfit.com/en/...
Page 9
Some people may experience allergic skin reactions to plastics, leathers, fibers, and other materials, and symptoms such as redness, swelling, and inflammation will occur after long-term contact with this product's components. If you experience such symptoms, please discontinue use and consult your doctor. Do not use unauthorized or incompatible power adapters or data cables, which may damage the watch and accessories, or cause fire, explosion, or other hazards.
Do not wear your watch during snorkeling, hot showers, hot springs, saunas (steam rooms), diving, underwater diving, water skiing, and other activities involving high-speed water currents. Do not place the device in direct sunlight for long periods. Excessively high or low ambient temperature may cause device failure. Handle with care during transportation.
Need help?
Do you have a question about the A2008 and is the answer not in the manual?
Questions and answers
how to set time
To set the time on the Amazfit A2008, follow these steps:
1. Download the Zepp App by scanning the QR code in the instruction manual or from the Google Play Store or Apple App Store.
2. Open the app, register an account, and log in.
3. Follow the steps in the app to pair your watch correctly.
4. Once pairing is complete, the watch will automatically display the correct time.
Note: Do not pair the watch directly using your mobile phone’s Bluetooth. Use the app for proper pairing.
This answer is automatically generated