Charging Your Smartband 2; Assembly - Sony SWR12 User Manual

Hide thumbs Also See for SWR12:
Table of Contents

Advertisement

Charging your SmartBand 2

Before using your SmartBand 2 for the first time, you need to charge it for
approximately 30 minutes. Sony chargers are recommended.
Your SmartBand 2 turns off automatically when the charger is connected. You cannot
turn on the device while a charger is connected.
To charge your SmartBand 2
1
Plug one end of the USB cable into the charger or into the USB port of a
computer.
2
Plug the other end of the cable into the Micro USB port of your SmartBand 2.
3
While the battery is charging, notification light A changes its color. The
notification light changes to green when you reach 90% battery power.
Make sure the USB port is dry before you insert a USB cable into the port.
Your SmartBand 2 turns off when connecting to a charger, and goes back to its previous
on/off state when the charger is unplugged.
Battery notification light status
Red light
Battery is charging and the charge level is less than 15%.
Orange light
Battery is charging and the charge level is between 15% and 90%.
Green light
Battery is charging and the charge level is greater than 90%.
To check the battery level of your SmartBand 2
On your iPhone, find and tap SmartBand 2. The battery percentage level
appears on the home screen of your SmartBand 2 application.
You cannot check the battery level when your SmartBand 2 is charging.
Low battery level notification
When your SmartBand 2 reaches a specific battery level, the device vibrates and the
red light starts flashing every 4 seconds until you charge the device or it powers off.
The low battery level notification is triggered when you have approximately 5 minutes
left in Heart Activity mode and 75 minutes in STAMINA mode. The time varies
depending on usage. When battery level is below 1%, your SmartBand 2
automatically turns off. You need to charge your SmartBand 2 when the battery runs
out of power.
If the "Do not disturb" function is turned on, you will not get the low battery notification.

Assembly

To personalise your SmartBand 2, you can replace the wristband with bands of
different colour, which can be purchased separately.
This is an Internet version of this publication. © Print only for private use.
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartband 2

Table of Contents