Akyga AK-SC-E07 User Manual

Akyga AK-SC-E07 User Manual

Advertisement

AK-SC-E07 - user manual

Short description of the product

Akyga AK-SC-E07 adapter is used to convert the connectors used for charging electric vehicles. It
allows to convert a cable with a Type 1 plug into a Tesla plug. Thus the adapter is compatible with all
models of devices with a Tesla.
The product is compatible with the applicable national and European requirements.

What is in the box?

- AK-SC-E07 electric car adapter

Symbols explanation:

There is a particular danger connected with service.
There is a risk of losing health or life (e.g. by electic shock).
Important tips and information.
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change
in any way. In the reason of using the adapter for other purposes than those described, the
product may be demaged. The incorrect use may also cause hazard such as short-circuits,
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product
could be share to third partie only with the user manual included.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
The RoHS mark on the product is the manufacturer's declaration that the marked product meets
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which
aims to reduce the amount of hazardous substances penetrating into the environment from
electrical and electronic waste.
GREEN
Ecological Solutions
www.akyga.com
p. 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AK-SC-E07 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Akyga AK-SC-E07

  • Page 1 Short description of the product Akyga AK-SC-E07 adapter is used to convert the connectors used for charging electric vehicles. It allows to convert a cable with a Type 1 plug into a Tesla plug. Thus the adapter is compatible with all models of devices with a Tesla.
  • Page 2 AK-SC-E07 - user manual The II protection class device. It provides protection against electric shock against direct and indirect contact, and thanks to the additional isolation it is not necessary to connect the device case with the protective earth conductor.
  • Page 3 AK-SC-E07 - user manual Removing the most common problems Problem Cause Solution The adapter does not No voltage Check the correct connection of ź work the adapter to the power source Problem with the plug Check if EV adapter is properly ź...
  • Page 4 AK-SC-E07 - user manual Technical specfication Product code: ak-sc-e07 Supply voltage: 230 V Maximum amperage: 32 A Maximum power: 7.2 kW Temperature: -30 - 55 ºC Material: Thermoplastic Isolation material: IP Rating: IP54 Flame resistance: UL94V-0 Power inlet: Type 1...

This manual is also suitable for:

5901720137661

Table of Contents