Advertisement
01
WARNING: Complete the module
[4x]
programming procedure and tach
programming procedure before programming
the remotes. A maximum of four [4x] remotes
per system.
02
Set ignition to ON position.
OFF
ACC
ON START
ON
ENGINE
START
STOP
03
Press and release the antenna button, then
press and hold the antenna button. The
antenna's leds will turn solid BLUE.
04
Parking Light will fl ash once [1x].
05
Press once [1x] on the LOCK button of each
remote.
06
The antenna's leds will fl ash BLUE once [1x]
for each successful pairing.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2016
REMOTE PROGRAMMING PROCEDURE - 1 OF 1
07
Release the antenna button. The antenna's
leds will turn OFF.
08
Set ignition to OFF position.
OFF
OFF
ACC
ON START
ENGINE
START
STOP
09
Remote Programming Procedure completed.
_________________________________
>>
To program an additional remote as second
vehicle mode: Follow steps 1 to 4. Press twice
F
[2x] on the "F" button then press once [1x] on
the LOCK button of the remote. Follow steps
6 to 9.
_________________________________
HC3452A
PAGE 5 OF 12
• 20161024
www.idatalink.com
Advertisement
