Advertisement
WIRING INSTRUCTIONS
1. In order to power the unit,
extend the red, 12V+ wire to
the 12V+ post of the vehicle's
battery. Extend the black 12V-
wire to the ground post of the
vehicle's battery.
2. To turn the lightstick on,
connect the brown wire to a 12V+
source.
3. Momentarily connect the
yellow wire on a 12V+ source to
change flash patterns.
4. For left arrow function,
connect the blue wire to a
12V+ post (switch). There are 8
different left arrow flash patterns.
To select a pattern, engage the
blue wire to a 12V+ source and
momentarily connect the yellow
wire on a 12V+ source to select
the desired pattern.
5. For right arrow function,
connect the gray wire to a
12V+ post (switch). There are
8 different right arrow flash
patterns. To select a pattern,
engage the gray wire to a 12V+
source and momentarily connect
the yellow wire on a 12V+ source
to select the desired pattern.
5
Feniex Indu stries , Inc.
1 .800. 615 .8350 / feni ex.com
6. In order to achieve a
center out directional
pattern, connect both the
gray and blue wires to a
12V+ post (switch). There are
8 different center out flash
patterns. To select a pattern,
engage the blue and gray
wires to a 12V+ source and
momentarily connect the
yellow wire on a 12V+ source
to select the desired pattern.
7. For takedown steady
functionality, connect the
white wire to a 12V+ post
(switch).
8. For takedown flashing,
connect the green wire to a
12V+ post.
Advertisement
