Advertisement
PENDANT TRACK INSTALLATION (SUSPENSION WIRES TYPE)
Accessories required for pendant track installation:
NAME
NO
Suspension Wires
1.
4x30mm Tapping
2.
Screw
1. Before you install the pendant track, please refer to the picture of pendant hole diagram (ref fig 6)
and dimension spacing table, then go to the installation area for positioning and installing.
FIG 6
2. In the track installation area, using the tool
mark a straight line and the hole position for
installing the track (Fig 7).
4. Connect the suspension wires with the ceiling
box and track, adjust the suspension wires length
as per the required height, hold the track, and
install the ceiling box and suspension accesso-
ries;.Please refer to the installation instructions
of the External power supply installation for
wiring connections.
SKU
PICTURE
7977
FIG 7
FIG 9
SIZE
Used for installation/marking of track
suspension line 1.5m (customizable length of
suspension line)
For track installation and fixed use.
4x30mm
Dimension spacing table for hole of Pendant Magnet
track
SKU/Length
7950 / 0.5M
7951 / 1M
7953 / 1.5M
7952 / 2M
3. Fix the lifting accessories on the ceiling, check
whether the accessories are firmly installed and
ensure the safely of installation (Fig 8).
5. Load the magnetic track lights into the
track then switch on the power to test the
light (Fig 10).
2
ENGLISH
ENGLISH
DESCRIPTION
FIG 8
FIG 10
Advertisement
