View Scenea - Philips 22PFL3606 User Manual

Lock or unlock one or more channels
1
Press .
2
Select [Setup] > [Channel settings] >
[Child lock] > [Channel lock].
3
The first time you lock or unlock a channel,
you are prompted to enter your PIN code.
» A list of channels is displayed.
4
Select the channel that you want to lock or
unlock, then press OK.
» Locked channels are marked.
5
Repeat the process to lock or unlock more
channels.
6
To activate the locks, switch the TV on and
off.
» When you switch channels with
CH - or CH +, the locked channels are
skipped.
» When you access the locked channels
from the channel grid, you are
prompted to enter your PIN code.

View Scenea

You can display a default picture as the
wallpaper on your TV. You can also load another
picture as the wallpaper.
If the sleeptimer is off, the wallpaper is displayed
for 240 minutes. Otherwise, it is displayed for
the duration of the sleeptimer.
EN
22
Switch on Scenea
1
Press .
2
Select [Scenea], then press OK.
» If no picture has been set, the default
picture is displayed.
» If a customized Scenea picture is
loaded, that picture is displayed (see
'Customize the Scenea picture' on
page 22).
Customize the Scenea picture
You can load another picture as the wallpaper.
Note
•
When you load a new Scenea picture, it overrides the
current Scenea picture.
•
To use another picture as the wallpaper, you need a
USB storage device that contains a picture that is less
than 1 MB in size.
1
Load a picture smaller than 1MB in size
into a USB storage device.
2
Connect the USB storage device to the TV.
3
Press .
4
Select [Browse USB], then press OK.
5
Select a picture, then press
6
Select [Set as Scenea], then press OK.
7
Press any button to exit Scenea.
OPTIONS.