Table of Contents
Advertisement
Channel Set-up
1 Digit Direct
When [1 Digit Direct] is set to [On], you can
select a channel using one preset number
button (0 - 9) on the remote control.
Auto Tuning
Tunes in all the available channels
Programme Sorting
Changes the order in which the channels
are stored on the TV.
Programme Labels
Assign a channel name of your choice up
to seven letters or numbers.
Manual Programme Preset
Before selecting [Channel]/[AFT]/[Audio
Filter]/[Skip]/[Colour System], press
PROG +/– to select the programme
number with the channel. You cannot
select a programme number that is set to
[Skip:] (page 13).
Programme/TV System: Presets
programme channels manually.
Channel: Selects a channel number.
AFT: Allows you to fine-tune the
selected channel manually. When
[On] is selected, the fine tuning is
performed automatically.
Audio Filter: Improves the sound of
individual channels when distortion
occurs in mono broadcasts in TV
system [B/G], [I], [D/K] and [M].
Note
• You cannot receive stereo or dual sound
when [Low]/[High] is selected.
Skip: Skips unused channels.
Colour System: Select the colour
system according to the channel.
Signal Level: Displays the signal level
for programme currently being
watched.
FM Radio Set-up
Presets up to 30 FM radio stations that can
be received in your area.
Auto Tuning: Allows you to
automatically tune and store all the
available channels.
FM Radio Presets: Allows you to
manually tune and store each
available channel one at a time.
Note
• To enable this feature, access to FM Radio
mode by using Home (Menu) (page 9), then
preset your desired FM radio stations
according to the steps mentioned above.
Parental Lock
PIN Code
Sets a PIN code. Use 0-9 on the remote
control to enter a four-digit PIN code.
Change PIN Code
Select to change your PIN code.
Programme Block
Locks a channel from being watched. To
view a blocked channel, select
[Unblocked].
External Input Lock
Locks an external input from being
watched. To view a blocked external input,
select [Unblocked].
Note
• Entering the correct PIN code for blocked
channel or external input will temporarily
deactivates the [Parental Lock] feature. To
reactivate the [Parental Lock] settings, turn off
and on the TV.
Hint
• If you lost your PIN code, see page 22.
GB
13
GB
Advertisement
Table of Contents
