Yamaha DT125R 2004 Owner's Manual page 28

1D0-F8199-E2.qxd 20/9/04 11:32
PRE-OPERATION CHECKS
Control cables
Drive chain
Wheels and tires
Brake and shift pedals
4
Brake and clutch levers
Sidestand
Chassis fasteners
Instruments, lights,
signals and switches
Engine stop switch
Sidestand switch
All manuals and user guides at all-guides.com
Página 26
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation.
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
4-3
6-21
6-19/6-20
6-13
6-21
6-21
6-21
–
–
3-3
3-11