Ultra-V-R Front; Ultra-V-R Rear - Hall Technologies ULTRA-V Series User Manual

ULTRA-V-S and ULTRA-V-R

ULTRA-V-R FRONT

1) 5V DC: Power input. Connect supplied 5V power supply to power
Sender.
2) SERVICE: USB-Mini connection, used to restore factory defaults via PC
GUI.
3) PWR/VID/ACT: Status indicators
a.
b.
c.
4) HDMI OUT: HDMI local Output.

ULTRA-V-R REAR

1) INPUT: CAT6 Input port from ULTRA-V-S Sender.
8
© Copyright 2020 Hall Technologies
1 2
PWR: This LED indicates power is applied to the unit.
VID: This LED is lit when HDMI video is being output.
ACT: This LED blinks when HDMI processor is active (normal).
3 4
1