Connector And Indicator Functions; Ultra-V-1S Front; Ultra-V-1S Rear - Hall Technologies ULTRA-V Series User Manual

ULTRA-V-S and ULTRA-V-R

4.0 Connector and Indicator Functions

ULTRA-V-1S FRONT

1) 5V DC: Power input. Connect supplied 5V power supply to power
Sender.
2) SERVICE: USB-Mini connection, used to restore factory defaults via PC
GUI.
3) PWR/VID/ACT: Status indicators
a.
b.
c.
4) HDMI OUT: HDMI local Output.
5) HDMI IN: HDMI Input port.

ULTRA-V-1S REAR

1) OUTPUT: CAT6 Output port to ULTRA-V-R Receiver.
6
© Copyright 2020 Hall Technologies
1 2
PWR: This LED indicates power is applied to the unit.
VID: This LED is lit when HDMI video input is present.
ACT: This LED blinks when HDMI processor is active (normal).
3 4
1
5