Advertisement
Parts List
A Table Top
x1
E PVC Bolt Cover
x12
Do not discard any of the packaging until you have checked
that you have all the parts and the pack of fixings.
Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaflet and then follow the simple
step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and
the pack of fittings.
3. Assemble this product on a soft surface.
4. To ensure an easier assembly, we strongly advise that all fittings are only finger tightened
during initial assembly. Only upon completion of the assembly should all fixing points be fully
tightened.
5. We recommend a periodic check on all fixing points to make sure they remain fully tightened.
6. Keep fittings out of children's reach.
7. Do not use any other tools other than those recommended to build this product.
8. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
9. In the unlikely event that this product has missing or damaged parts, please visit our website
www.kettler.co.uk/shop.
B Table Leg
x2
F Bolt
M6x20(mm)
x4
C Frame
x2
G Bolt
M6x40(mm)
x8
D Allen Key
x1
H Steel Washer
x12
Advertisement
