Toshiba WT10-A Series User Manual page 68

Real Time Clock
Problem
The BIOS setting
and system date/
time are lost.
Internal display panel
Apparent computer's display panel problems may be related to the
computer's setup and configuration.
Problem
Markings appear on
the computer's
display panel.
Memory Media Card
For further information, please refer to
Problem
Memory media card
error occurs
User's Manual
Procedure
The lasting time of the Real Time Clock (RTC) has
run out - you will need to set the date and time in
the BIOS setup utility by using the following steps:
1. Launch the BIOS setup utility.
Please refer to TOSHIBA Setup Utility
for further information.
2. Set the date in the System Date field.
3. Set the time in the System Time field.
4. Select Save and Exit -> Exit Saving
Changes- a confirmation message will be
displayed.
5. Select Yes - the BIOS setup utility will end
and the computer will restart.
Procedure
These marks may have come from contact with
touch screen. You should try to remove the marks
by gently wiping the display panel with a clean dry
cloth or, if this fails, with a good quality LCD screen
cleaner. In this latter instance you should always
follow the instructions with the screen cleaner and
always ensure you let the display panel dry properly.
Operating Basics.
Procedure
Remove the memory media card from the
computer and then reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
section
6-6