English may be obtained from your travel. Dealer. Visit your dealer or www.gravely.com for a list of ENGINE MANUAL languages available for your equipment. The engine on this unit is covered by a Manuals printed in languages separate manual specific to the engine.
Page 3
(N) PRODUCT REGISTRATION and Power Takeoff (PTO) is disengaged The Gravely dealer must register the product (Off). Engine must stop if operator at the time of purchase. Registering the leaves seat when steering levers are in...
SAFETY WARNING: This cutting machine CAUTION: POTENTIALLY is capable of amputating hands HAZARDOUS SITUATION! and feet and throwing objects. If not avoided, MAY Failure to observe the safety RESULT in minor or instructions in the manuals and on moderate injury. It may also decals could result in serious be used to alert against injury or death.
Page 5
TO AVOID SERIOUS INJURY OR DEATH Read the operator’s manual. Avoid sudden turns. Keep children and others away from unit while operating. Keep safety devices (guards, shields, switches, ect. ) Never direct discharge toward other people. in place and working. Thrown objects can cause injury.
Page 6
4. Danger! • Keep safety devices (guards, shields, switches, etc.) in place and working. Poisonous battery fluid contains sulfuric acid and • Check interlock system per manual its contact with skin, eyes before use. or clothing can cause severe chemical burns. OL4450 •...
Page 7
All operators and mechanics should be Never operate with the discharge shield trained. The owner is responsible for training raised, removed or altered, unless using a the users. grass catcher. Never let children or untrained people Do not change the engine governor setting or operate or service the equipment.
Page 8
GENERAL SAFETY RULES pressure to system. This manual must be made available to the FOREIGN FLUID INJECTED operator of the Gravely mower at all times. INTO BODY can result in Read this manual carefully and learn how to gangrene. Fluid must be use the machine correctly.
Page 9
If the starting system does not work, consult Before dismounting, disengage the PTO, your Gravely Dealer immediately. lower all attachments, place the steering Operate the mower only in daylight or when control levers in the park position, turn off the the area to be mowed is lit well by artificial engine, and remove the key.
Page 10
Allow the Gravely mower time to cool before Hydraulic System touching the engine, muffler, or any other part Make sure all hydraulic fluid, hoses, and lines which may be hot.
In case of electrolyte contact, rinse area with Gravely dealer or a qualified repair service. plenty of water and seek medical attention. When seating tire beads on the rims, never Make sure the battery is charged in a well- exceed 2,4 bar (35 p.s.i.) or the maximum...
Page 12
SETUP INSTRUCTIONS Gravely mowers are shipped partially assembled. After uncrating the power unit and mower deck, initial setup is required. IMPORTANT: During the unpacking of the crate all goods should be matched against the packing list and all shortages or damages should be noted and reported to the carrier immediately.
Page 13
Tires Check Function of All Controls See SPECIFICATIONS on page 45. Ensure unit runs and performs properly. CAUTION: Avoid injury! Explosive WARNING: FAILURE OF separation of tire and rim parts is CONTROLS could result in death possible when they are serviced or serious injury.
Page 14
1. Locate the left-side ROPS mount pocket on the inside of the frame above the wheel motor. Mount the left side base weldment (item 9) in the pocket using two 1/2 x 3 1/2 in. hex bolts (item 4), two 1/2 in.
CONTROLS AND FEATURES NOTE: If the machine does not pass this test, See figure 8 on page 15 for Controls and DO NOT OPERATE. Take it to your Gravely Features locations. Dealer. 3. Move the steering lever rearward and Safety Interlock System release the steering lever.
Page 17
NOTE: Aggressive turning can scuff or Power Take Off (PTO) damage lawns. ALWAYS keep both wheels Switch rotating when making sharp turns. DO NOT Power take off (PTO) make turns with inside wheel completely switch engages and stopped. To obtain minimum turning radius, slowly reverse inside wheel while moving the disengages the mower outside wheel slowly forward.
Page 18
Cutting Height Fixed Axle To change the cutting height, raise the mower deck into the transport position. Turn the Deck Height Adjust Dial until the desired cutting height is shown and then lower the deck to the cutting position. The mower can be adjusted to mow from 1 – 6 inches (25 –...
Page 19
FILLING FUEL TANK Fuel Stabilizer Gasoline left in the fuel system for extended WARNING: AVOID INJURY. periods without a stabilizer will deteriorate, resulting in gum deposits in the system. Read and understand entire These deposits can damage the carburetor Safety section before and the fuel hoses, filter and tank.
Page 20
STARTING AND SHUT OFF CAUTION: ALWAYS remove the ignition key when the unit is not in CAUTION: Read entire use. Owner/Operator Manual and Engine Manual first. DO NOT STOPPING IN AN EMERGENCY attempt to start the engine at this time. WARNING: Operating unit on slopes may lead to loss of CAUTION: Always start and...
Page 21
MOWING Anti-Scalp Mount Here for Wheel WARNING: To avoid damage to 1.0 – 1.5" Cut the mower, re-torque all fastening hardware, including blade and spindle pulley retaining nuts, after the first hour of mowing operation. Operate the unit only when seated in the operator’s position.
Page 22
Uneven Terrain Tips For Efficient Mowing WARNING: To avoid the loss of CAUTION: Clear the area of control and to prevent overturning people, pets, and all visible the mower, always across slopes, debris before beginning mowing never up and down. operations.
Page 23
IMPORTANT: Attempting to tow more than 300 pounds (137 kg) with the Gravely mower will lead to premature parts failure and void the warranty. The mower is designed for towing in light duty applications only.
MAINTENANCE SCHEDULE WARNING: AVOID INJURY. Read and understand entire Safety section before proceeding. Gravely Dealers will provide any service, parts or adjustments which may be required to keep your unit operating at peak efficiency. Should engine require service, contact an Gravely Dealer or an authorized engine manufacturer's service center.
Page 25
Engage parking brake and engage transmission bypass lever (see Parking Brake Moving the Unit with the Engine Off on page 23). Push unit. If unit rolls, contact your Gravely Dealer. Clean Unit Clean engine, battery, seat, mower deck, etc. of all dirt and debris.
Page 26
Interval Task Action 25 Hours Check Battery Keep battery and battery terminals clean (see Cleaning the Battery or Every on page 31). Season Air Cleaner Inspect and clear away debris, replace if necessary. Elements Lubricate Unit Apply grease to fitting on each front wheel 50 Hours Check Check mower blade mounting hardware and all other fasteners.
SERVICE AND ADJUSTMENTS WARNING: AVOID INJURY. Read and understand entire Safety section before proceeding. SERVICE ACCESS CAUTION: Shut off the engine before servicing the mower. Make sure the seat is fully raised and locked before performing any maintenance on the mower. The seat can come down very quickly once the seat lock lever is released.
Page 28
Engine Dipstick Clean Engine Oil Figure 17 Engine Oil Change WARNING: Engine oil is a toxic FULL FULL substance. Dispose of used oil properly. Contact your local authorities for approved disposal Figure 16 OE3281 methods or possible recycling. Oil Filter Change Change the engine oil and filter after the first Change the engine oil filter initially after the 8 hours of operation.
Page 29
Changing Hydraulic Fluid Engine Oil Filter CAUTION: Be sure the engine has been stopped, the steering control levers are in the park position, and the key has been removed before changing or checking the hydraulic oil in the mower. Allow the hydraulic fluid to cool.
Page 30
6. Shut off the engine, check and add Removing the Battery hydraulic oil as necessary. 7. Close the bypass valves on both pumps. WARNING: The battery terminals Do not over tighten. or metal tools could short against the metal components of the 8.
Page 31
Use only the same size fuse as was originally installed. 1. Positive 2. Negative There are two fuses on your Gravely mower. terminal terminal They are located on the frame on the inside. One is close to the front of the fuel tank. The...
Page 32
7. Install the wheel assembly using the bolt and lock nut removed in step 3. Servicing the Caster Pivot Bearings 1. Park the unit on a level surface, put the steering control levers in the park position, turn off the engine and remove the key.
Page 33
4. If adjustment is needed, move the control lever back to the inward position and begin to pull rearward. At this beginning rearward motion the clevis pin should begin to contact the end of the slot and start putting pressure on the spring.
Page 34
2. Loosen the 1/2-13" hex nut (1). If the IMPORTANT: To prevent excessive engine wear, do not run the engine without the air blade height is lower than the height of cleaner installed. cut knob, loosen the 1/2-13 x 1.75" (2) bolt which runs through the height of cut IMPORTANT: The engine is air cooled and requires a large amount of air intake when...
Page 35
Replace the inner cartridge (6) yearly or The fuel filter cannot be disassembled. If the every 250 hours whichever comes first. fuel filter becomes clogged, replace it with a new one. IMPORTANT: DO NOT attempt to clean the 1. Park the machine safely in a well- secondary element.
Page 36
CAUTION: Do not run the engine before all cooling system parts are reinstalled to keep the cooling and carburetion as intended. TIRE AND WHEEL SERVICE CAUTION: Separation of a tire Spark Plug Wire and rim can cause an explosion Figure 26 that could cause serious injury or OE3341 death.
Page 37
BLADE MAINTENANCE DO NOT Sharpen to This Pattern CAUTION: Before removing the blades, be sure the engine has stopped and the key has been removed. The blades may be sharp. Wear gloves or wrap them in a towel before handling them. Inspect the blades daily for straightness, sharpness, and balance.
Page 38
To guarantee long belt life, always use genuine Gravely belts. Drive Belt Removal and Installation WARNING: Most service work Balance Rod requires the engine to be shut OFF.
Page 39
6. Reconnect the deck belt tension rod and Belt Routing tighten the 3/8-16" nut until the tension spring measures 5-9/16” from hook end- to-hook end. Tighten the other nut against the rod bracket to lock. Install both deck belt shields. 7.
10. Engage the deck tension by returning Belt Routing – Pumps the deck tension arm back to the slot. (See Deck Belt Removal and Installation on page 39.) Pump Pump 11. Reattach the negative battery cable. Idler Engine Figure 33 9.
Page 41
TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION Excessive 1. Loose spindle/blade fasteners. 1. Retorque or replace as necessary. Vibration 2. Blade interference with grass 2. Clean the underside of the buildup in deck. deck. 3. Balance blades. See Blade 3. Blades out of balance. Maintenance on page 37.
Page 42
TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION Blades Won’t 1. Deck belt worn, loose or 1. Replace deck belt. broken. Rotate 2. Deck belt off pulley. 2. Reinstall deck belt. 3. Clutch failed. 3. Contact dealer. Mower Places 1. Engine RPM too low. 1.
Page 43
TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION Engine Will Not 1. Dead Battery. 1. Charge battery. See Battery Maintenance on page 30. Turn Over 2. Correct the connection. 2. Bad ground connection. 3. Correct the connection. 3. Poor terminal connection at battery. 4.
SPECIFICATIONS Model Number 992220 992221 992222 Model Pro-Ride 254 Pro-Ride 260 Pro-Ride 266 Engine Kawasaki Engine Model Number FX751V FX850V Engine Displacement - Cu. In. (cc) 52 (852) Maximum Recommended RPM 3600 Liquid or Air Cooled Speed Forward Maximum – MPH (km/h) 12 (19.3)
Page 46
Genuine Ariens or Gravely brand service parts and accessories are warranted to be free from defects in material and workmanship for a period of 90 days after the date of purchase. An authorized Ariens or Gravely dealer will repair or replace any such part or accessory free of charge, except for labor, during that period.
Page 47
Engines and engine accessories are covered only by the engine manufacturer’s warranty and are not covered by this warranty. • Parts that are not genuine Ariens or Gravely service parts are not covered by this warranty. • The following maintenance, service and replacement items are not covered by this warranty unless...
• You are responsible for presenting your small off-road equipment to an authorized Ariens, Gravely, or Parker service representative as soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.
Page 49
(4.) Repair or replacement of any warranted part under the warranty provisions of this article must be performed at no charge to the owner at an authorized Ariens, Gravely, or Parker service representative. (5.) Notwithstanding the provisions of subsection (4) above, warranty services or repairs must be provided at authorized Ariens, Gravely, or Parker service representatives that are franchised to service the subject small off-road equipment.
Page 50
GRAVELY 655 West Ryan Street Brillion, WI 54110-1072 920-756-2141 Fax 920-756-2407 www.gravely.com WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.