Specifications - Tarmo SH-012 Manual

Fig. 2
B1: Wall mounting hole
B2: Battery compartment (with cover screwed on)
2. Before use
• Please read the instruction manual carefully.
• This information will help you to familiarise yourself with your new device, to learn all of its functions and parts, to find out important
details about its first use and how to operate it and to get advice in the event of a malfunction.
• Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights
arising from defects due to incorrect use.
• We shall not be liable for any damage occurring as a result of not following these instructions. Likewise, we take no responsibility for
any incorrect readings and for any consequences which may result from them.
• Please take particular note of the safety advice!
• Please keep this instruction manual for future reference.
3. Package contents
• Wireless weather station (Receiver)
• Outdoor transmitter (CH1)
• Instruction manual

4. Specifications

• Measuring range indoors: Temperature -10–+60 °C (14–140 °F), humidity 20–95%
• Measuring range outdoors: Temperature -40–+60 °C (−40–+140 °F), humidity 1–99%
• Accuracy: Temperature +/-1 °C (2 °F) between 0 °C to 50 °C, otherwise +/-2 °C (4 °F). Humidity +/-5% between 30% to 70%,
otherwise +/-8%
• Power Consumption: Receiver 2 x 1.5 V AAA (included), transmitter 2 x 1.5 V AAA (included)
• Battery life: Transmitter 1–1.5 years, receiver 1.5–2 years
• Air pressure measuring unit: hPa (range 800–1100 hPa)
• RCC function: DCF or WWVB time code signal (depending on the region)
• Transmission range: 60 m in open field
• Transmission frequency: 433 MHz
• Transmission time: CH1: 50 seconds, CH2: 53 seconds, CH3: 56 seconds
• Weather forecast: sunny, slightly cloudy, cloudy, rainy, stormy, snow, heavy snow.
5. For your safety
• This product is exclusively intended for the field of application described above. It should only be used as described within these
instructions.
• Unauthorised repairs, modifications or changes to the product are prohibited.
Caution! Risk of injury!
• Keep these instruments and the batteries out of the reach of children.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent damage caused by leaking.
• Never use a combination of old and new batteries together, or batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries.
Important information on product safety!
• Do not place your device where it can experience extreme temperatures, vibrations or shocks.
• Protect it from moisture.
• The outdoor transmitter is protected against splash water, but is not watertight. Choose a shady, dry position for the outdoor transmit-
ter.
6. Getting started
6.1 Inserting the batteries in the receiver
• Place both instruments on a desk within a distance of approximately 1.5 metres. Avoid getting them close to possible interference
sources (electronic devices and radio installations).
• Remove the protective foil from the display of the receiver.
• Remove the battery cover and insert two new batteries 1.5 V AAA, polarity as illustrated. Close the battery compartment again.
• The device will alert you with a beep and all of the LCD segments will be displayed for a moment.
• Default settings:
Time: 2016-1-1, 0:00; language: ENG; alarm: 7:00, OFF; hour system: 24 hr; temperature unit: °C; pressure: 1013 hPa
• Pressure is blinking: press "+/°C/°F" or "-/RCC" to adjust the value; press "BARO" to confirm and quit. If no button is pressed, after it
will auto quit the setting 20 seconds and go to RF search.
295052_langaton_sääasema_ko_EN-FI-SV-ET-LV-LT-RU.indd 2 295052_langaton_sääasema_ko_EN-FI-SV-ET-LV-LT-RU.indd 2
B3: Switch 1-2-3 for channel selection
B4: Signal transfer button (TX)
16.9.2020 14.19.06 16.9.2020 14.19.06