SB SB4184 Manual page 56

14
warm water. Rinse and dry it thoroughly
after cleaning.
Caution! Only after the door seals are
completely dry should the appliance be
powered on
Replacing the LED light:
This product contains a light source of
energy efficiency class F.
Warning:
The LED light should be replaced by a
competent person. If the LED light is
damaged, contact the customer helpline
for assistance. To replace the LED light,
the below steps can be followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and
out.
3. Detach the LED and pull it while
pressing the connector latch.
4. Replace LED light and snap it correctly
in place.