Sealey API Series Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using workbenches
‰
and associated workbench drawers.
WARNING! Use the workbench on level and solid ground, preferably concrete. Avoid tarmacadam since the workbench may sink into the
‰
surface.
Locate the workbench in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the workbench clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
Use the supplied rubber caps on all exposed self tapping screw projections.
9
DO NOT remove a fully loaded drawer.
8
DO NOT use the workbench drawers for any purpose other than that for which they are designed.
8
DO NOT use the workbench drawers out of doors.
8
DO NOT get the workbench drawers wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the workbench drawers with any solvents which may damage the painted surfaces.
8
NOTE: The assembly of this product to the workbench will require assistance.
2. INTRODUCTION
Slim width single or double drawer units for our API Series of Industrial Workbenches, to give the option of more under bench access.
Supplied fixing kit allowing unit to be securely mounted. Drawers run on heavy-duty ball-bearing drawer slides with a load bearing of up to
40kg. Each drawer is fitted with fixed dividers running front to back and supplied with cross dividers for personalised storage layout.
Supplied with high quality lock and two coded keys.
3. SPECIFICATION
Model No:.................................................................. API14........................................................API15
Capacity:................................................................. 40kg per Drawer........................................40kg per Drawer
Compatibility:........................................ API1500, API1800, API2100 ..................... API1500, API1800, API2100
Drawer Size (WxDxH):............................Medium 300 x 450 x 70mm......................................300 x 450 x 70mm- x2
Overall Size:..........................................
© Jack Sealey Limited
SINGLE/DOUBLE DRAWER UNIT FOR
API SERIES WORKBENCHES
API14,API15
MODEL NO:
405 x 580 x 180mm....................................407 x 580 x 280mm
Original Language Version
API14, API15 Issue: 4 (H,F) 24/05/23