Table of Contents
Advertisement
SAFETY INSTRUCTIONS
These safety instructions are meant for the owners
of FARMI equipment, as well as those who operate,
service or repair it.
The instructions help with:
•
using the machine safely, appropriately and
effectively.
•
identifying, avoiding and preventing potentially
dangerous situations.
The manufacturer supplies an instruction manual,
which must always be available at the place of
operation of the machine. Each user must read the
safety, maintenance and operating instructions be-
fore operating the machine, and comply with these
instructions at all times.
Ensure that every operator of the machine is
familiar with the content of the instruction
instructions, and has been suitably trained
before operating the machine.
The machine complies with technical requirements
and applicable safety regulations. However, incorrect
use, maintenance or repair of the machine may
cause risks.
In addition to the instruction manual, remember to
comply with regulations of the local occupational
health and safety authorities, and with your
country's laws and decrees.
The manufacturer is not liable for damages
caused by:
•
incorrect, negligent or inappropriate use of the
product.
•
non-original spare parts.
•
normal wear and tear.
•
misuse caused by an untrained person's
improper actions.
•
alterations made without the manufacturer's
permission.
JL 450
!
CAUTION!
STARTING
•
Familiarize yourself thoroughly with the use,
operation and controls of the machine and its
equipment before starting.
•
Familiarize yourself with the capacities and
limitations of the machine and its equipment.
•
Do not use the machine unless you are
completely familiar with its operation.
•
Be aware of the machine's danger zones.
•
During operation, prevent bystanders from
entering the danger zone.
•
Ensure that each operator has the necessary
safety equipment, such as a helmet, safety
goggles, work safety boots and suitable protective
clothing.
•
Never wear loose clothing around moving parts.
Protect long hair!
•
Ensure that work is carried out according to the
stipulations of applicable occupational health
and safety legislation.
•
Before starting up or using the machine, ensure
that it cannot cause a risk to other people or
property.
•
Perform a safety check on the machine before
every use. If you observe any faults or
•
Before operating the machine, ensure that there
are no foreign articles in it.
•
Place the machine on a hard, level surface for
operation. In the winter avoid working in slippery
areas.
•
Before operation, ensure the machine is properly
connected.
•
6
Written authorization
must be requested from the
manufacturer for any
alterations to the machine.
Advertisement
Table of Contents
