Ikelite 6973.07 Manual page 25

Photos are over-exposed (too light)
•
Adjust aperture (smaller), shutter speed (faster), or ISO (lower)
setting.
•
Move light(s) farther away from your subject.
•
Adjust exposure compensation in the camera.
•
Adjust lighting power.
Photos are under-exposed (too dark)
•
Adjust aperture (larger), shutter speed (slower), or ISO (higher)
setting.
•
Move light(s) closer to your subject and make sure they are pointed
in the right direction.
•
Adjust exposure compensation in the camera.
•
Adjust lighting power.
Strobe(s) will not fire
•
Turn on strobe.
•
Check the strobe(s) battery life.
•
Restore the camera to factory default settings. There are some
camera settings that will prevent an external flash from firing.
•
Check camera settings recommended for use with an external
strobe in the beginning of this manual.
•
Check that the fiber optic cord or electrical sync cord is properly
attached.
•
If using, check that the hotshoe is pushed all of the way forward on
the camera.
25