Hotel Mode - Sharp LC-40UG7242K Service Manual

10. HOTEL MODE

Description:
The Hotel mode and Lock mode share some common functions. Hotel mode can use the Lock
mode functions and also other specific functions for Hotels.
How to enter in Hotel mode:
There are 2 ways to enter in Hotel mode:
1. Press MENU + 7906
2. Enter in MENU -> SETTINGS -> LOCK -> Hotel Mode
Entering using way 1) drives to Hotel mode functions, available by advanced users. These
functions should be modified by technical staff.
Entering using way 2) needs to use a password. By default the "Lock" password is "0000" and
can be changed later. After allowing the "System Lock", the "Hotel mode" item is available is this
menu. Hotel Mode is protected by "7906" password, it cannot be changed.
Lock Mode functions:
It is important to understand that Lock mode functions can be combined with the Hotel Mode
functions. Let's start the Lock Mode functions description first:
OPTIONS:
1. System Lock [ON/OFF]
2. Set Password [4 digits entry]
3. Channel lock [Green key to lock/unlock channels in the channel list]
4. Parental Guidance [4 .. 18 years and OFF options]
5. Key lock [Full – Partial – OFF]
6. Source Lock [Satellite, ATV, AV, Scart, YPbPr, VGA/PC, HDMI1...HDMI3]
7. Hotel Mode [Option to enter in Hotel mode from Lock Menu]
System Lock: This option enables or disables the lock options
2 to 7, it must be ON to set any of them.
Set Password: This option allows the change password for Lock mode.
Channel lock: This function allows to lock by password any channel in the channel list. To
watch the locked channel, it is necessary to enter the same password set in Lock mode.
Parental Guidance: This function checks the Transport Stream parental control
data and allows to watch the film if the age threshold set in the menu is higher than
the age threshold sent by the transport stream. If it is OFF, no limitation is set.
Key lock: This function will lock the local keypad totally (all keys disabled) or partially
(on/off key working, rest of keys disabled). OFF means all local keypad keys enabled.
Source Lock: This function will lock the selected source(s).
Hotel Mode: This function enters in Hotel mode after entering the password "7906"
Hotel Mode functions:
Once we entered in Hotel Mode we find the following functions:
1. Hotel Mode [ON/OFF]
2. Default Source [DTV, Satellite, ATV, AV, Scart, YPbPr, VGA/PC, HDMI1...HDMI3]
3. DTV Channel Type [Digital TV / Radio]
4. Default Prog [Program number]
5. Default Volume [0..100]
6. Max Volume [0..100]
64