Advertisement
Quick Links
1. For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
2. This product is designed for installation in ceilings up to a 12/12 pitch (45 degree angle). Duct connector must point up. DO NOT
MOUNT THIS PRODUCT IN A WALL.
3. Do not let plaster dust or any other construction residue enter the fan. During construction or renovation, cover the fan.
4. Combustible products used for cleaning such as acetone, alcohol, ether, or benzol are highly explosive and should never be used
close to the fan.
The ventilation fan should be cleaned regularly (internally and externally) to preserve its appearance and performance.
Use a dusting brush attachment to gently vacuum the exterior and interior of the ventilation fan to remove dust and debris.
Advertisement
Related Manuals for S&P PCD80XHP
Summary of Contents for S&P PCD80XHP
- Page 1 1. For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. 2. This product is designed for installation in ceilings up to a 12/12 pitch (45 degree angle). Duct connector must point up. DO NOT MOUNT THIS PRODUCT IN A WALL.
- Page 2 INSULATION* ROOF CAP* (Place around and (with built-in over Fan Housing.) damper) POWER HOUSING CABLE* Keep duct runs short Seal gaps around Housing. ROUND DUCT* WALL CAP* Seal duct (with built-in Purchase ROUND joints with damper) ELBOW(S) * separately tape.
Need help?
Do you have a question about the PCD80XHP and is the answer not in the manual?
Questions and answers