Connecting To An Audio Device - Samsung 4 Series Manual

Using an Optical (Digital) or Headphone Connection
Available devices: digital audio system, ampliier, DVD home theatre
✎
DIGITAL AUDIO OUT (OPTICAL)
When a Digital Audio System is connected to the
of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
When the receiver (amplifier or DVD home theatre) is set to on, you can hear sound output from the TV's
optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD
home theatre. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB
(Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the
amplifier or DVD home theatre. If you want to hear 5.1 CH audio, connect the digital audio out jack from your
DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
✎
: You can connect your headphones to the headphones output on your set. While the
Headphones
headphones are connected, the sound from the built-in speakers will be disabled.
Sound function may be restricted when connecting headphones to the TV.
Headphone volume and TV volume are adjusted separately.
CONNECTIONS COMMON INTERFACE
To watch paid channels, the "CI or CI+ CARD" must be inserted.
If you don't insert the "CI or CI+ CARD", some channels will
display the message "Scrambled Signal".
The pairing information containing a telephone number, the "CI or
CI+ CARD" ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
When the coniguration of channel information has inished, the
message "Updating Completed" is displayed, indicating the
channel list is updated.
✎
NOTE
You must obtain a "CI or CI+ CARD" from a local cable service provider.
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI (CI+) CARD" may
cause damage to it.
Insert the "CI or CI+ CARD" in the direction marked on the card.
The location of the
COMMON INTERFACE
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
If you have any problems, please contact a service provider.
Insert the "CI or CI+ CARD" that supports the current antenna settings. The screen will be distorted or will not be
seen.

Connecting to an Audio Device

DIGITAL AUDIO OUT (OPTICAL)
Slot
slot may be different depending on the model.
digital audio system
OPTICAL
jack, decrease the volume
English