Installing Or Removing Cage Nuts; Specifications - Tripp Lite SmartRack AG-0534 Owner's Manual

Equipment Installation

Installing or Removing Cage Nuts

WARNING: The flanges of the cage nuts should engage the sides of the square opening in the rail, not the top and bottom. Follow the
instructions in your equipment documentation to ensure proper installation of your equipment.
Installing Cage Nuts
1 Locate the numbered square openings in the mounting rails where you plan to install your
equipment. You will install cage nuts (included) into the square openings in order to provide an
attachment point for the mounting screws (included).
Note: Consult your equipment documentation to determine how many cage nuts will be required
and where they will need to be installed.
2 From the inside of the mounting rail, insert one of the flanges of the cage nut through the square
opening. Press it against the side of the square opening. Each flange should engage one side of
the square opening, not the top or bottom.
3 Compress the cage nut at the sides slightly to allow the remaining flange to fit through the square
opening. When the cage nut is properly installed, both flanges will protrude through the square
opening and will be visible on the outer surface of the mounting rail. Repeat steps 1-3 until all
required cage nuts are installed.
4 After installing the required cage nuts, use the included mounting screws and cup washers to
secure your equipment to the rack rail. Place the cup washers between the screws and the
equipment mounting brackets.
Note: Your equipment may also include mounting hardware. Read the mounting instructions that
came with your equipment before installing your equipment.
To Remove Cage Nuts, Reverse Steps 1-3
Note: You may wish to use a cage nut tool (user-supplied) to aid cage nut installation and removal.

Specifications

Load Capacity*
Model Static
SR24UB 3000 lb.
(1363 kg)
SR24UBEXP 3000 lb.
(1363 kg)
SR24UBSP1 3000 lb.
(1363 kg)
SR24UBEXPSP1 3000 lb.
(1363 kg)
SR25UB 3000 lb.
(1363 kg)
SR42UB 3000 lb.
(1363 kg)
20-08-129-932723RevH.indb 12 20-08-129-932723RevH.indb 12
Unit Dimensions
Rolling Height Width
2250 lb. 47.25 in. 23.63 in.
(1022 kg) (1200 mm) (600 mm)
2250 lb. 47.25 in. 23.63 in.
(1022 kg) (1200 mm) (600 mm)
2250 lb. 47.25 in. 23.63 in.
(1022 kg) (1200 mm) (600 mm)
2250 lb. 47.25 in. 23.63 in.
(1022 kg) (1200 mm) (600 mm)
2250 lb. 49.00 in. 23.63 in.
(1022 kg) (1245 mm) (600 mm)
2250 lb. 78.5 in. 23.63 in.
(1022 kg) (1994 mm) (600 mm)
1
2
3
4
Depth Weight Height
43 in. 190 lb. 51.4 in.
(1092 mm) (86 kg) (1306 mm)
43 in. 145 lb. 51.4 in.
(1092 mm) (66 kg) (1306 mm)
43 in. 190 lb. 51.4 in.
(1092 mm) (86 kg) (1306 mm)
43 in. 145 lb. 51.4 in.
(1092 mm) (66 kg) (1306 mm)
43 in. 195 lb. 53.5 in.
(1092 mm) (88.6 kg) (1358.9 mm)
43 in. 286 lb. 85 in.
(1092 mm) (130 kg) (2149 mm)
12
22
21
2 2
20
19
2 1
18
2 0
2 2
1 9
2 1
1 8
2 0
2 2
1 9
2 1
1 8
2 0
1 9
1 8
Shipping Dimensions
Width Depth Weight
26 in. 45 in. 232 lb.
(660 mm) (1140 mm) (105 kg)
26 in. 45 in. 187 lb.
(660 mm) (1140 mm) (85 kg)
28 in. 47 in. 240 lb.
(705 mm) (1194 mm) (109 kg)
28 in. 47 in. 195 lb.
(705 mm) (1194 mm) (88 kg)
24 in. 43.0 in. 237.0 lb.
(609.6 mm) (1092.2 mm) (107.5 kg)
26 in. 45 in. 328 lb.
(660 mm) (1140 mm) (149 kg)
8/24/2020 3:54:15 PM 8/24/2020 3:54:15 PM