Table of Contents
Advertisement
Battery installation/ Battery charging
1
Press down at
2
Slide the handset cover
3
Insert the batteries, then close the
handset cover.
Important:
● Use the supplied rechargeable batteries.
For replacement, we recommend using
the Panasonic rechargeable batteries
noted on page 2.
● USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
● Do NOT use alkaline/manganese/
Ni-Cd batteries.
● Confirm correct polarities (
Charge for about at least 7 hours.
When the handset needs charging, the display shows
"Low battery" and there is a warning beep every 2 minutes
during a call, recharge the handset before using it again.
When charging,
Note:
● If the batteries are fully charged, but the operating time
seems to be shorter, clean the battery ends (
the charge contacts with a dry cloth and charge again.
For assistance, please visit http://shop.panasonic.com/support
.
1
.
2
).
A
–
,
+
will scroll on the display.
).
,
–
+
Installation
1
+
2
–
CALL BLOCK
) and
A
–
+
7
Advertisement
Table of Contents
