Table of Contents
Advertisement
2-12. PICTURE TUBE REMOVAL
Four picture tube special nuts
Picture tube shield
KV-32 XBR 35
Four P tapping screws
(M 4X16)
REMOVAL OF ANODE-CAP
NOTE : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon
paint on the CRT, after removing the anode.
REMOVING
PROCEDURES
direction indicated by the arrow
HOW TO HANDLE AN ANODE-CAP
l
Don't hurt the surface of anode-caps with
sharp
shaped
material!
inside of anode-caps!
A material fitting called as shatter-hook
terminal is built in the rubber.
Don't turn the foot of rubber over hardly!
The shatter-hook terminal will stick out or
hurt the rubber.
C board 'yv 7,'
rubber
firmly in the direction indicated by the
a r r o w 8.
Four P tapping screws
cap
separated from the anode button, the
anode-cap can be removed by turning up
the rubber cap and pulling up it in the
direction of the arrow
Advertisement
Table of Contents
