GREISINGER USB 3100 N Installation And Operating Manual

Advertisement

Quick Links

S62.0.01.6C-01
Interface converter
USB 3100 N
Installation and operating manual
WEEE-Reg.-Nr. DE 93889386
GREISINGER
electronic GmbH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the USB 3100 N and is the answer not in the manual?

Questions and answers

Summary of Contents for GREISINGER USB 3100 N

  • Page 1 S62.0.01.6C-01 Interface converter USB 3100 N Installation and operating manual WEEE-Reg.-Nr. DE 93889386 GREISINGER electronic GmbH...
  • Page 2 S62.0.01.6C-01 page 2 of 6 Content 1. Intended use ..........................3 2. General advice .......................... 3 3. Safety instructions ........................3 4. Disposal notes ........................... 3 5. Installation ..........................4 6. Specification ..........................5 7. Frequently asked questions (FAQ) .................... 6 How to check whether the adaptor has been installed correctly and via which COM-port can I approach the installed adaptor? .................
  • Page 3 S62.0.01.6C-01 page 3 of 6 1. Intended use The electrically isolated interface converter USB 3100 enables the connection of a GMH 3xxx to the USB-interface of your PC. 2. General advice Read through this document attentively and make yourself familiar to the operation of the device before you use it.
  • Page 4 For installation of the device drivers a user account with an administrator-authorisation is required. If you haven’t an appropriate authorisation please consult your system administrator. If you already have a device installed with the same USB-Chipset the USB 3100 N will be installed automatically.
  • Page 5 S62.0.01.6C-01 page 5 of 6 6. Specification Connection: Standard USB-plug connector (type A) GMH 3xxx: 3.5mm stereo jack for direct connection of a GMH3xxx Power Supply: via USB-interface Operating temperature: 0 ... +50 °C Storage temperature: -20 ... +70 °C Housing: Cable length: approx.
  • Page 6 S62.0.01.6C-01 page 6 of 6 7. Frequently asked questions (FAQ) 7.1 How to check whether the adaptor has been installed correctly and via which COM- port can I approach the installed adaptor? Start the Device-Manager: start \ settings \ control panel \ performance and maintenance \ system \ hardware and open the submenu “Ports (COM &...

Table of Contents