Table of Contents
Related Manuals for GREISINGER EBW 3
Summary of Contents for GREISINGER EBW 3
- Page 1 B07.0.01.6C-04 EASYBus - interface converter EBW 3 Installation and operating manual GREISINGER electronic GmbH D - 93128 Regenstauf, Hans-Sachs-Straße 26 +49 (0) 9402 / 9383-0 +49 (0) 9402 / 9383-33 info@greisinger.de...
- Page 2 B07.0.01.6C-04 Page 2 of 6 Content 1. Intended use ..........................3 2. General advice .......................... 3 3. Safety instructions ........................3 4. Disposal notes ........................... 3 5. Installation ..........................4 6. Specification ..........................5 7. Frequently asked questions (FAQ) .................... 6 How to check whether the adaptor has been installed correctly and via which COM-port can I approach the installed adaptor? .................
- Page 3 B07.0.01.6C-04 Page 3 of 6 1. Intended use The electrically isolated interface converter enables the connection of EASYBus sensor module to the USB-interface of your PC. Applications: Exchange data capture. Configuration of Logger-function. Readout measuring data storage of EASYBus-modules. etc. 2.
- Page 4 For installation of the device drivers a user account with an administrator-authorisation is required. If you haven’t an appropriate authorisation please consult your system administrator. If you already have a device installed with the same USB-Chipset the EBW 3 will be installed automatically.
- Page 5 B07.0.01.6C-04 Page 5 of 6 6. Specification Connection: Standard USB-plug connector (type A) EASYBus: 2-pol screw / plug terminal, RM 3.5 (max. clamping range: 1.5 mm²) EASYBus-connection data: Max. Bus load: 2 EASYBus-standard loads Pipeline length: max. 2 meters Transfer rate: 4800 baud Short-circuit stability: momentary short-circuit-proof...
- Page 6 B07.0.01.6C-04 Page 6 of 6 7. Frequently asked questions (FAQ) 7.1 How to check whether the adaptor has been installed correctly and via which COM- port can I approach the installed adaptor? Start the Device-Manager: start \ settings \ control panel \ performance and maintenance \ system \ hardware and open the submenu “Ports (COM &...
Need help?
Do you have a question about the EBW 3 and is the answer not in the manual?
Questions and answers