Table of Contents
Advertisement
ENG
Parts
The actual product may differ
slightly from the illustration.
Middle Cabinet
(Wall Mount Only)
Speaker Dust Cover
Screw①
: 6EA
Installing the Speakers
Speakers
2 EA
1 EA
1 EA
Speaker Cable
Screws
Screw➁
: 4EA
Bracket Pads
3 EA
66
➢
This speaker installation guide is for the 4240 Model.
How to Assemble the Speakers(Standing)
①
Remove the screws indicated on the rear of the PDP (6 screws on
the left and right sides).
②
Attach the Bracket Pads to the Speaker's Guide Bracket.
Set the Speaker Guide Bracket into the square grooves located on
either side of the PDP's bottom rear and secure it with the provided
screws ①, ➁. (Always use the proper screws, as indicated.)
Screw①
Screw②
③
Secure the Speaker Dust Cover by setting it into the grooves
located on the front side of the speakers.
④
Connect the speakers to the PDP using the speaker cable.
The connection terminals are on the rear side of both the PDP and
the speakers. (Match the colour coded terminals and cables.)
BLACK
BLACK RED
WARNING
1. When moving the PDP with the speakers attached, be sure to hold on to the PDP
to prevent damage. (Damage may occur to the speaker connecting brackets or
the speakers.)
2. Speakers of 8Ω Impedance, 15W Nom. Power, 30W Max. Power is recommended.
Bracket Pads
RED
Advertisement
Table of Contents
