Adjusting the Picture Settings
Your television has several settings which allow you to control
picture quality.
1
Press the MENU button.
Result:
The main menu is displayed.
2
Press the † or ... button to select Picture.
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Select the required option (Custom, Colour Tone) pressing
the † or ... button.
5
Press the † or ... button to select Custom.
Press the ENTER (
Result:
The Custom menu is displayed.
6
Press the ENTER (
The options are displayed in the following order.
◆ Custom : Contrast, Brightness, Sharpness, Colour,
Tint(NTSC ONLY)
➢
Custom Options available in PC, DVI Mode: Contrast,
Brightness, Sharpness.
➢
The horizontal bar is displayed. Move the horizontal bar's
cursor left or right by pressing the œ or √ button.
➢
When the picture mode is set to Custom, the settings values
may vary depending on the input source.
(ex. RF, Video, Component, PC or DVI)
➢
If you make any changes to these settings, the picture
standard is automatically switched to the Custom.
◆ Colour Tone : Cool 2, Cool 1, Normal, Warm 1, Warm 2.
7
When you are satisfied with the settings, press the EXIT/TV (
button to return to normal viewing.
➢
If you make any changes to these settings, the picture
standard is automatically switched to the Custom.
) button.
) button.
) button to change the setting.
TV
Mode
Custom
Colour Tone
Colour Control
Film Mode
Size
PIP
† More
Move
TV
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Move
Contrast
TV
Mode
Custom
Colour Tone
Colour Control
Film Mode
Size
PIP
† More
Move
)
Picture
√ √
: Dynamic
√ √
√ √
: Normal
√ √
√ √
: Off
√ √
: 16 : 9
√ √
Enter
Return
Custom
100
45
75
55
R 50
Enter
Return
100
Picture
: Custom
: Normal
Cool 2
Cool 1
: Off
Normal
: 16 : 9
Warm 1
Warm 2
Enter
Return
27
ENG