Front View - Lenovo User Guide User Manual

Lenovo EVEREST UG.book Page 17 Friday, August 17, 2007 5:40 PM
d Battery latch - manual
e Central Processor Unit (CPU)/Wireless LAN Card* compartment
f Memory (RAM) compartment

Front View

Refer to the diagram below to identify the components on this side of the
computer.
a Power-status indicator
b Display Release Latch
c Multi-media reader slot
The manual battery latch is used to keep the battery pack secured. Move
the manual battery latch to the unlocked position to attach or remove
the battery pack. Move the manual latch to the locked position after
attaching the battery pack.
The CPU, wireless network card, and the radiator are secured in a
compartment.
Important: Do not replace the CPU and Wireless LAN card yourself!
Visit an authorized service center or retailer for replacing.
Wireless LAN Card is optional.
The memory compartment provides expansion capability for additional
memory. The BIOS automatically detects the amount of memory in the
system and configures CMOS accordingly during the Power-On
Self-Test (POST) process. There is no hardware or software (including
BIOS) setup required after the memory is installed.
Note: (1) Only purchase expansion modules from authorized retailers
of this computer to ensure maximum compatibility and
reliability.
(2) If you only insert one memory card in the compartment, plug
it into the slot near the mainboard.
a
c
For details on "Power-status indicators", see page 24.
Slide and hold this release latch to open the display.
You can install an SD Card, a Multi-media Card, a Memory Stick or a
Memory Stick Pro card in the Multi-media Reader slot.
Multi-media reader is optional.
Note: Only use the memory card listed above; for detail information about
the usage, read the instructions shipped with the memory card.
b
*
Chapter 3. Getting Started
Getting Started
17