Switching Your Television On And Off; Placing Your Television In Standby Mode - Samsung DW28A20 Owner's Instructions Manual

Switching Your Television On and Off

The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the " " (On/Off) button on the front of the television.
Result: The Standby indicator on the front of the television
lights up.
3
Press the POWER ( ) button on the remote control to switch the
television on.
Result: The programme that you were watching last is re-
selected automatically.
When power is turned off in DTV mode, DTV mode will
appear when power is turned on.
When power is turned off in Analog mode, Analog
mode will appear when power is turned on.
➢
If you have not yet stored any channels, No clear picture
appears. Refer to "Storing Channels Automatically" on page
28 or "Storing Channels Manually" on page 30.
4
To switch your television off, press the " " (On/Off) button again.

Placing Your Television in Standby Mode

Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
Power Off (Timer On) : LED Green
Power On (Timer On) : LED Green
Power On (Timer Off) : LED Off
2
To switch the television back on, simply press the POWER ( )
button again.
☛
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the " "
(On/Off) button on the front of the television. It is best to
unplug the set from the mains and aerial.
Front of the TV
English - 9