Related Manuals for XU1 XLHDS-018
Summary of Contents for XU1 XLHDS-018
- Page 1 XU1 Power tools 1–23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 XLHDS-018 0119...
- Page 2 1 Gear Selector 5 Variable Speed Trigger 9 Mode Selector 2 Inbuilt Spirit Level (Pitch) 6 Soft Grip Handle 10 Torque Adjustment Collar 3 Inbuilt Spirit Level (Yaw) 7 Belt Clip 11 Chuck Collar 4 Forward/Reverse Selector 8 LED Worklight 12 10mm Keyless Chuck...
-
Page 3: Specifications
SPECIFICATIONS CONTROLS OPERATION Voltage: Forward/Reverse Selector Usage Tips Chuck Size: 10mm 1. For forward rotation, push the Forward/Reverse 1. Depress and release the Variable Speed Trigger to No Load Speed: 0-400 | 0-1,500/min Selector towards the left side of the tool. ensure it is not locked. -
Page 4: Maintenance
MAINTENANCE WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A WARNING! Ensure the tool is turned off CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS and disconnected from the power supply WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. -
Page 5: Safety Instructions
SAFETY GENERAL POWER TOOL or a key left attached to a rotating part of the power tool may result in personal injury. SAFETY WARNINGS INSTRUCTIONS e) Do not overreach. Keep proper footing and balance at all times. This enables better WARNING! Read all safety DESCRIPTION OF SYMBOLS control of the power tool in unexpected situations. - Page 6 ADDITIONAL SAFETY WARNINGS FOR HAMMER DRILLS WARNING! Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting a ‘live’ wire may make exposed metal parts of the power tool ‘live’ and could give the operator an electric shock.
- Page 7 Any other use may result in risk of fire, electric shock or electrocution. Regulatory Compliance Mark (RCM) Only use the compatible XU1 charger to recharge this XU1 battery. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat.
- Page 8 SPECIFICATIONS CONTROLS WARRANTY Battery Capacity Indicator YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER Input Voltage: THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR There are battery capacity indicators on the battery pack.
- Page 9 Any other use may result Transformer energy rating (MEPS) in risk of fire, electric shock or electrocution. Only use the compatible XU1 charger to recharge XU1 batteries. Polarity Do not place any object on top of the charger or place...
- Page 10 SPECIFICATIONS WARRANTY Red light ON: Battery is CHARGING. Green light ON: Battery is FULLY CHARGED. 60mins (1.5Ah) YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER Charge Time: Green & Red light ON: The surrounding THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR 80mins (2.0Ah) temperature is too high or too low.