Krown Visual VibeAlert User Manual

MANUFACTURING
Visual VibeAlert™ Alarm Clock with Bed Shaker
User Manual
(K-VVIB)
PARTS & FUNCTION
INSTALLATION
Plug the AC/DC adaptor into an AC outlet, and then plug the DC jack
into the back of the unit.
TO SET TIME, 12/24 HR AND THE SNOOZE DURATION
1. Press SET once, the hour digits "12" flash. Press
the time in hours (hold / DEMO or
Press SET again, the minute digits "00" flash. Press
2.
set the time in minutes. (hold
3. Press SET again, the display shows "12Hr" and flashes. Press
DEMO or
to select "12Hr" or "24Hr" time format.
If "12Hr" is selected, the PM will appear on the left side to indicate
the afternoon time; there is no AM indicator.
4. Press SET again, the display shows "05" and flashes. Press
or to select your snooze time from 5 to 60 minutes.
5. Press SET again or if no key pressed for approx. 10 seconds to exit
the setting mode.
Voice/TDD: 817-738-2485 | VP: 817-200-1324| Fax: 817-738-1970 |
Innovation & Design for Accessibility, Diversity & Inclusion for All
/ DEMO or to set
to advance rapidly).
/ DEMO or
/ DEMO or to advance rapidly).
/
/ DEMO
www.krownmfg.com
The Visual VibeAlert™ offers three wake options
which include powerful sound, flashing lights and
a strong and soothing bed shaker. Wake up to
sound, light, vibration or a combination.
This alarm will wake up even the deepest sleeper.
PRODUCT FEATURES
•
Large LED digital alarm display
• Wake options: Sound, light, bed shaker or a combination
• Snooze Duration: Select anywhere between 5 and 60 minutes
•
Volume: 90dB with three adjustable settings
• Frequency: high, medium and low frequency settings...great for
people with varying degrees of hearing loss
• Dimmer: user selectable choice of high, medium or low
•
USB Charging Port (cable not included)
• Battery Backup (2 AAA batteries not included)
• 1-year Manufacturer's Warranty
TO SET THE ALARM (default at 6:00 AM)
Press and hold AL SET / SELECT, the AL appears and the alarm's
1.
hour digit flash. Press
/ DEMO or
(hold
2. Press AL SET / SELECT once again, the alarm's minute digit flash.
Press / DEMO or
or to advance rapidly).
3. Press AL SET / SELECT once again, LCD displays "HI" (vibration at HI
level) and
HI (strong vibration level)
LO (soft vibration level)
4. Press AL SET / SELECT once again, LCD displays "F1" and
press / DEMO or
F1 (low tone, 800 Hz)
F2 (mid tone, 1 KHz)
F3 (high tone, 1.5 KHz)
5. Press AL SET / SELECT once again, LCD displays "L1" (low) and
flash, press
to
L1 (low)
L2 (medium)
L3 (high)
6. Press AL SET / SELECT once again, the display shows "A60" and
flashes. Press
to 60 minutes.
Press AL SET / SELECT once again or no button around 10 seconds
7.
to exit the alarm setting mode.
Voice/TDD: 817-738-2485 | VP: 817-200-1324| Fax: 817-738-1970 |
K-VVIB Visual VibeAlert™
/ DEMO or to set the alarm in hours.
to advance rapidly).
to set the alarm in minutes. (hold
flash, press / DEMO or to select:
to select the alarm tone (frequency):
/ DEMO or to select the alarm sound level:
/ DEMO or
to select your alarm duration from 5
/ DEMO
flash,
www.krownmfg.com