Table of Contents
Advertisement
Available languages
Available languages
PARTS
OPERATION
1. Place the diffuser correctly, remove the outer cover, and then remove the inner cover
from the diffuser.
2. Connect one end of the power cable to the back of the device; connect the other end
to the USB slot of a computer or suitable 5V power USB adaptor.
3. Fill the water tank with water, not higher than the maximum water level line (150
ml). Add 2-3 drops of essential oils into the water tank. Essential oil can be more or less
according to your personal preference.
4. Put the inner cover back to the bottom of the body and then put the outer cover at
the top correctly. Plug the adapter.
5. Press the MIST button to turn on the device (at the same time the buzzer beeps):
- Press the MIST button once to turn on and mist continuously.
- Press the MIST button twice to turn on and work with intermittent output (it works for
1. Nozzle Decor
2. Outer cover
3. Inner cover
4. Ultrasonic atomizer
5. Triangular plate
6. Container
7. DC power jack
8. Base
9. USB Wire
10. Silicone cushion
11. Switch button
12. Drive board
13. Fan
14. Screw
15. Tower-shaped connector
Advertisement
Table of Contents
