How To Remove: Shelf Supports; How To Replace: Lamp; Troubleshooting - AEG CME565060B User Manual

11.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is cold.
Step 2 Carefully pull the shelf supports
up and out of the front catch.
Step 3 Pull the front end of the shelf
support away from the side
wall.
Step 4 Pull the supports out of the rear
catch.
Install the shelf supports in the opposite sequence.

11.3 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.
Step 1
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
TROUBLESHOOTING
3
2
Step 3
Put a cloth on the bottom of
the cavity.
1
29/36