Advertisement
REPLACING THE CAR DOME LAMP
Follow the directions show below for a new lamp changing.
1. Position light switch to "
2. Push back the lamp cover and open it. (Refer to the following figure)
3. Remove and discard the old lamp.
4. Install a new bulb.
5. Close the cover.
Bulb
Bulb Specification
Diameter:
ø8mm
Length:
28mm
Voltage Spec.: DC12V, 5W
CAR DOME LAMP WIRING
Line for Car Dome Lamp
".
Lamp Cover
Light Switch
Note:
Color
Red
White
Interior Light System
Black
Connection
Power Supply
Ground
4
Advertisement
