Page 2
To insure best use of the unit, please read the user’s manual carefully CAUTION 1. Do not use any damaged or leaking battery, if using a battery to power. 2. Do not expose this product to direct sunlight, heat or extreme humid conditions.
Page 3
Features HD 1080p Picture Universal Mul -Func on Video Monitor Field Monitor: Acts as a Sub-Monitor for a Bigger Picture 7-inch Hi-Res Display Screen Lightweight, Compact & Portable Input Interface: HDMI, AV, USB, OSD Controller, Headphone Jack (3.5mm) Front Panel Bu on Control Center (4) Custom Se ngs Func on Bu ons Built-in Speaker Digital Zoom Ability...
1. Product description 1. 1 Front view: MODE MENU 10 9 8 7 6 5 4 3 2 1 1. Power indicator light: when power on/standby, it turns red; when signal in, it turns green. : Power on/off 3. F4:custom button, enter secondary menu item f(self-defined button), then self-define the function that user need 4.
1.2 Rear view: UPGRADE Controller HDMI DC 12V 1. USB Update Port. 2. OSD Controller input, Can insert OSD Controller into this port, to have a remote operation on the parameters of the monitor. : Earphone insert. 4. AV: AV signal input, to input the AV signal into the monitor through the assorted port.
Page 6
1.4 HDMI Lock 1. HDMI locking plate 2. Locking screw To use HDMI locking plate to lock the plug of HDMI cable, then put the locking plate close to the monitor, and finally bolt the locking screw to lock the plate with the monitor, As the picture below (arrow direction) 1.5 Sunshade 1 Sunshade...
Page 7
1.6 Battery Plate Use the battery plate and install on the back of the monitor, you can assemble the corresponding battery to power the monitor. The Battery Plate included is pictured below: LP-E6 • LP-E6 battery plate for batter of canon DV: Canon LP-E6 Remark: Different battery clips are compatible with, and attach to the back of the display monitor.
Page 8
2. Operation instruction Before setting the menu functions, please make sure the device is connected correctly, Power on the unit, switch the dial to the ON position. According to the input signal, make sure to adjust the display’s input to display the proper display on the LCD screen.
Page 9
• Pic. Mode: Standard, dynamic, downy, user When select”user”, it could according to the practical situation to adjust the image of brightness, contrast, saturation, sharpness. • Brightness: To adjust the image’s brightness. • Contrast: To adjust the brightest and darkest ratio of the image, please note the sense of picture when adjust, proportion too large or small, will make the picture lose the color of showy.
Page 10
• Language: language for OSD: Chinese / English. • Aspect Ratio: To change the display to ratio panoramic view, automatic, just scan, zoom 1, zoom 2, 16: 9, 4:3. • NO Signal: Color options of screen background when no signal: black screen, white screen, red screen, green screen, blue screen.
Page 11
Function Center Marker Safe frame Image Freeze Image Flip Check Field Focus Assist • Center Marker: To set centre mark (cross mark) display. • Safe frame: To adjust screen marker (off, 96%, 93&, 90%, 85%, 80%, 2.35:1). • Image Freeze: the current picture still (capture function). •...