Heater Description; General Description - Fervi R609A Operation And Maintenance Manual

HARDWARE

2 HEATER DESCRIPTION

2.1 General description

The Electric radiant infrared heaters are equipped with an incandescent bulb with a power
of 1300 W for Art. R609A and 2000 W for Art. R610A. The bulbs are to be mounted inside the
lamp holder, with care taken not to touch the bulb with your hands. The heater is
equipped with an adjustable bracket to install on the tripod supplied. At the back there is the
electrical circuit on which the plate is attached and where the power cord exits.
1
2
3
4
2
3
Figure 1 - Overview of the device
Front grille
Incandescent bulb
Support tripod
Housing
1
4
Page 5 of 13