DVS EC Automatic - Control Unit User Manual

Displayed on the home screen

• Main Display
  Will show fan operation Indication.
  Moving symbol = Fan On
  Static symbol = Fan Off
  
• Temperature Display
  By pressing the Temperature Display button you can check the Temperature at the control panel and the Supply Air Temperature in the system fan. The associated LED will illuminate indicating which temperature you are viewing. You can toggle between each by pressing the Temperature Display button more than once.
• System
  On / Off Press for 2 seconds to turn the system On / Off.
  
• LED Indicators
  See Temperature Display.
  
• Air Supply
  To increase or decrease the calibrated condensation control setting (air supply rate) press Increase or Decrease.

Main Display

Pressing either or while displaying House temperature or Supply temperature will change to displaying the FAN ON or FAN OFF indication

Turning high temperature cut out on and off

(Factory set to 27^o )

Holding down the button for 5 seconds will enter cut out on and off the shortcut for setting the High Temperature Cut out. (Factory set to 27^o) Both LEDs (house and supply) will flash.

The system will shut off when the supply air is above this temperature.

The display will show the current High Temp cut out temperature, or "0F" if the feature is off. Pressing or will change the cut out temperature, and ensure the High Temperature cut out feature is activated.

The feature can be turned off by pressing or until "0F" is displayed.

After 15 seconds without pressing a button, the menu will exit and return to Fan Operation ON / OFF display.

* Please note: 'OF' on the controller means 'OFF'

Useful Tips

System Performance

Your DVS^® will help provide a healthier, drier living environment. Soon after installation, if in a cooler month, the house should feel fresher and drier. Typically within a week or two you will also see evidence of this in a reduction of condensation and dampness through the home.

Each system is calibrated (set) to the size of your home. For example; a 100m² home will be set to "10". A 150m² home will be set to "15". However, if you are still experiencing some moisture issues, increase the fan speed (Air supply rate) by setting the system to a larger house size. If the system is working well and your home is drier, you may be able to select a lower air supply rate.

Note: Maintaining comfortable living temperatures in the home is a key to achieving maximum DVS® performance. To get the best out of your DVS^® EC Automatic in cool conditions, use home heating if needed.

If you are getting regular performance issues e.g. wet windows, turn the system off and call 0800 387 387 so that we can assist with this issue.

Filter(s).

For best results the filter(s) needs to be changed annually. Over time the filter(s) can become blocked resulting in poor performance of the system.
To ensure system efficiency and cover under the DVS® Five Year Warranty, the filter(s) should be replaced annually with a genuine DVS® filter.

For further assistance please call us on 0800 387 387 or visit www.DVS.co.nz to purchase filters.

Enjoy a healthier, more comfortable home
0800 387 387

Documents / Resources

References

• DVS® Home Ventilation Systems & Heat Transfer Systems

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download DVS EC Automatic - Control Unit User Manual